Contact Us :-
+91 77560
26486
info@sensalite.in
Contact Us :-
+91 77560
26486
info@sensalite.in
The Differential Pressure Sensor is a device responsible for measuring the difference between two pressures. These two pressures are connected to each side of the differential pressure sensor. They also measure pressure drops across oil or air filters. They can measure fluid levels as well by measuring the pressure between the above and below the liquid. Another parameter that these sensors are able to measure is the flow rate of liquids.
| Series/ Model | D2M |
|---|---|
| Medium | Non-combustible, non-corrosive air, insensitive to moisture, dust, condensation and oil |
| Range | 0-100% |
| Accuracy | ±1.0%FS (±2%FS@25Pa) |
| Type | Room |
| Output | 0-10V & 4-20mA |
| Display | 4 bits 0.8” red LED |
| Approval | CE |
| Series/ Model | DPT |
|---|---|
| Medium | Air |
| Range | Range Selection/td> |
| Accuracy | ±1.0%FS (±2.0%FS@25Pa range) |
| Type | Room |
| Output | 0~10V, 4~20mA (2 wires), 0~5V, RS485 |
| Display | LCD |
| Approval | CE |
| Series/ Model | D5 |
|---|---|
| Medium | Air |
| Probe Length | 200 mm |
| Range | 0-10000 pa |
| Accuracy | up to ±1% FS |
| Type | Duct |
| Output | 0-10V / 4-20mA |
| Display | LCD |
| Approval | CE |
| Series/ Model | DPTM |
|---|---|
| Medium | Non-combustible, non-corrosive air, insensitive to moisture, dust, condensation and oil |
| Range | 0-10000Pa |
| Accuracy | 1.0% or 0.5%FS |
| Type | Industrial equipment |
| Output | 0~10V, 4~20mA (2 wires) or RS485 |
| Approval | CE |
| Series/ Model | SDP |
|---|---|
| Medium | non-combustible, non-corrosive air, not sensitive to moisture, dust, condensation and oil |
| Range | 0-100% |
| Accuracy | %FS±1.0%±0.5% |
| Type | Room |
| Output | 0-10V & 4-20mA (3 wires), RS485/Modbus |
| Display | high contrast 3.5” TFT color LCD, resolution 320x480 |
| Approval | CE |
| Series/ Model | PDT |
|---|---|
| Medium | Fluid and gas |
| Range | 0-16 bar |
| Accuracy | typical ±0.5%FS (BFSL) |
| Type | Room |
| Output | 4~20mA (2 wires), 0-10VDC(3 wires) or RS485 |
| Display | large LCD, with unit indication |
| Approval | CE |
| Series/ Model | A2GT |
|---|---|
| Medium | Air and non-combustible compatible gases |
| Range | -125 ~ 125 Pa |
| Accuracy |
Gauge: ±2%FS(125Pa：±3%, 60Pa：±4%) @20°~26C;
Switch: ±1%FS; Transmitter: ±1.0%FS |
| Type | Room |
| Output |
Switch: 2×SPST, 3A×30VDC/250VAC;
Transmitter: 0~10V, 4~20mA |
| Display | Pointer display |
| Approval | CE |
| Series/ Model | A2000 |
|---|---|
| Medium | Air and non-combustible compatible gases |
| Range | 0-60 Pa |
| Accuracy | ±2%FS (125Pa: ±3%, 60Pa: ±4%) @20~26°C |
| Type | Mount |
| Display | Pointer Dial |
| Approval | CE |
| Series/ Model | 606 |
|---|---|
| Medium | Air and other non-combustible, non-aggressive gases |
| Range | 20~300Pa 50~500Pa 100~1000Pa 0.5~2.5kPa |
| Pressure Limit | 27500Pa (-30~75°C) |
| Materials | housing PC, diaphragm silicone and contact silver alloy |
| Service life | over 106 switching cycles |
| Repeatability | ±2% |
| Approval | CE |
| Series/ Model | WDPS |
|---|---|
| Medium | Non-combustible, non-aggressive liquids such as water or oil |
| Max static pressure | 20bar |
| Max differential pressure | 20bar |
| Working medium temperature | -10~70°C |
| Working temperature | -20~70°C |
| Storage temperature | -30~80°C |
| Display | Red/Green LED |
| Approval | CE |
| Series/ Model | G3EX |
|---|---|
| Medium | Combustible gas, vapor and air |
| Range | 0-100% |
| Accuracy | 2%(0.3°C),3% (0.4°C) |
| Power | 18~30VDC |
| Output | 0~10V, 4~20mA (3 wires), RS485/Modbus |
| Display | LED digital display, power/fault/alarm LED indicato |
| Approval | CE |
